Fault diagnosis
Identifying the true cause before any intervention or breaking
Hawalli
Master plumber in Hateen
A complex plumbing fault in Hateen may come from a hidden point because houses here are smaller with pipes embedded in narrow walls. When a quick repair does not solve it we bring a master plumber who knows how to open a wall without wrecking the house. We read the drawing if it exists and test each branch separately to pinpoint the faulty one without doubt. The work takes patience and precise measurement.
- 24-hour emergency
- Camera first, every job
- Leak detection without breaking
- All six governorates
What sets this area apart
Hateen houses are medium-rise structures built thirty years or more ago, with pipes buried in walls and floors. When hot water cuts to the kitchen alone or water seeps from inside a wall we must read the plan first. Pipes may be tangled in one riser, and disconnecting the wrong branch cuts water elsewhere. We use metal detectors and thin snakes to work inside walls from limited access points. After repair we test pressure and flow and seal the opening carefully.
Hateen sits in Hawalli governorate, an older residential zone with mid-rise buildings that have concealed plumbing systems.
Before opening any wall we use a metal detector to trace pipes because the original plan may be unreliable.
What a master plumber handles
Hidden leak repair
Pinpointing and repairing hidden leaks with minimum wall opening
Pipe installation
Running pressure and drain lines in correct materials and sizes
Fixtures and fittings
Installing and setting sanitary ware, valves and mixers correctly
Pumps and tanks
Diagnosing and fixing faults in transfer, pressure pumps and tanks
Post-repair check
Pressure testing and confirming no leak after the work is closed
How we work
Our four steps, and you see every one
You call and describe it
Tell us what is happening and where, and the right equipment is loaded before we arrive.
The camera goes down
We film the line from inside and know the kind of blockage and its exact place. No guessing.
We clear it
High pressure water, a machine or a drain snake, whichever the line actually needs.
We film it again
The camera runs a second pass and you see the line clear with your own eyes before we leave.
Who we work for
Same method, same equipment. Only the size of the job changes.
Homes and apartments
- Drain and gully unclogging
- Cesspit suction
- Leak detection without breaking
- Tank cleaning and waterproofing
Offices
- Plumbing maintenance contracts
- Mixer and valve repair
- Low water pressure
- Clearing bathroom lines
Restaurants
- Grease traps
- Commercial kitchen lines
- Restaurant gas lines
- Scheduled clearing and cleaning
Complexes and buildings
- Sewer network maintenance
- Sewage and basement sump pumps
- Manhole and inspection chamber cleaning
- Operation and maintenance contracts
Why us
Why Al Amana
Amana means trust. Someone else's home is not ours to be careless in.
Filmed before and after
Do not take our word for it. Look at the line yourself.
Clearing before breaking
Breaking is the last resort, never the first step.
24-hour emergency
A blocked line does not wait for the morning.
All of Kuwait
Six governorates, 139 areas.
Maintenance contracts
For buildings and complexes, servicing before the problem starts.
We work on commercial sites too
Restaurants, offices and complexes, not only homes.
More areas for Master plumber
Other services in Hateen
24-hour emergency plumber
See the detailsPlumber (sabbak)
See the detailsUnderground tank cleaning
See the detailsUnderground tank construction
See the detailsCommon questions
Questions about Master plumber in Hateen
Need someone now? The emergency line is open any hour.
+965 9668 4964
If pipes are hidden in the wall must the whole thing be broken open?
No, we use detectors to trace the pipe path precisely then open a small hole at the right spot. If the damage is confined to a short length we cut that section and fit a new pipe with compression fittings. The wall is then easily patched because the hole is small.
How do you know which hidden pipe branch is the cause?
We test each branch separately by closing its control valve then opening taps to see which is affected. This tells us which pipe is faulty before we dig. If no control valves exist we add them at the problem point to ease future diagnosis.
