Walls and base coating
Full internal surface treated including the pit base
Hawalli
Cesspit waterproofing in South Surra
Sealing a cesspit in South Surra addresses leaks that develop at the lower wall corners or beneath the pit base. We open the pit and check the surrounding ground for cracks or subsidence, then apply bituminous sealant to all external surfaces. The seal is tested by filling the pit and waiting 48 hours before resuming use.
- 24-hour emergency
- Camera first, every job
- Leak detection without breaking
- All six governorates
What sets this area apart
South Surra residential houses, relatively modern, have pits backfilled with sand and gravel at 3 to 4 metres depth under the rear courtyard. The sandy soil in this area shifts with heavy irrigation and weather, causing slow collapse around the pit. If not sealed early, moisture penetrates and contaminates surrounding ground. We dig carefully around the pit without removing the base backfill, then spray coating on all external walls and the base from every side.
South Surra is a residential suburb in Hawalli extending south from the main Surra Street, where most homes have wide rear courtyards.
We use flexible sealants that tolerate slow soil movement in sandy ground without cracking.
What the waterproofing covers
Crack repair first
Cracks and voids filled before any coating is applied
Pre-clean and empty
Pit emptied and pressure-washed before waterproofing starts
Before and after camera
Internal camera documents wall condition before work and after
Access collar sealing
Collar and pipe-entry points sealed against infiltration separately
Night emergency service
Available around the clock across all 6 Kuwait governorates
How we work
Our four steps, and you see every one
You call and describe it
Tell us what is happening and where, and the right equipment is loaded before we arrive.
The camera goes down
We film the line from inside and know the kind of blockage and its exact place. No guessing.
We clear it
High pressure water, a machine or a drain snake, whichever the line actually needs.
We film it again
The camera runs a second pass and you see the line clear with your own eyes before we leave.
Who we work for
Same method, same equipment. Only the size of the job changes.
Homes and apartments
- Drain and gully unclogging
- Cesspit suction
- Leak detection without breaking
- Tank cleaning and waterproofing
Offices
- Plumbing maintenance contracts
- Mixer and valve repair
- Low water pressure
- Clearing bathroom lines
Restaurants
- Grease traps
- Commercial kitchen lines
- Restaurant gas lines
- Scheduled clearing and cleaning
Complexes and buildings
- Sewer network maintenance
- Sewage and basement sump pumps
- Manhole and inspection chamber cleaning
- Operation and maintenance contracts
Why us
Why Al Amana
Amana means trust. Someone else's home is not ours to be careless in.
Filmed before and after
Do not take our word for it. Look at the line yourself.
Clearing before breaking
Breaking is the last resort, never the first step.
24-hour emergency
A blocked line does not wait for the morning.
All of Kuwait
Six governorates, 139 areas.
Maintenance contracts
For buildings and complexes, servicing before the problem starts.
We work on commercial sites too
Restaurants, offices and complexes, not only homes.
More areas for Cesspit waterproofing
Other services in South Surra
Cesspit cleaning
See the detailsBasement sump cleaning
See the detailsSewer odour removal
See the detailsStorm-drain network design
See the detailsCommon questions
Questions about Cesspit waterproofing in South Surra
Need someone now? The emergency line is open any hour.
+965 9668 4964
Does sealing protect the pit from total collapse if soil movement continues?
Sealing stops leaks but does not repair structural collapse. If we see serious subsidence we recommend a structural engineer to reinforce the walls or rebuild the pit itself.
How long does the coating take to dry before filling the pit with water?
The base coat dries in 24 hours, but full cure takes 48 hours before water pressure resumes. In very hot weather we add accelerators to speed curing.
