Pre-fit camera check
Line condition and diameter confirmed before valve position is chosen

Jahra
Backflow valve installation on Mutlaa ridge begins by lifting the ground cover and fully scanning the pipe. We measure normal and reverse pressure, fit a high-pressure rated valve and test it under simulated loads.
Mutlaa is an elevated area on desert ridges requiring drain pipes rated for higher pressure than low-lying zones. Houses built on the ridge suffer severe pressure swings because water must travel down a long slope before reaching the station. The valve here must be high-pressure rated to handle both pumping forces and reversal together. We select a metal valve with rapid-lock mechanism and test it by simulating high and reverse pressure in sequence.
Mutlaa is an elevated district in Jahra governorate where height and long distances increase backflow risk significantly.
We test the valve at simulated pressure reaching its maximum rated limit before final handover.
Line condition and diameter confirmed before valve position is chosen
Closest viable point to the public sewer for maximum protection
Valve set into the line without unnecessary tile breaking
Flap mechanism tested in both directions before the line is reconnected
Line filmed again to confirm valve seating and unobstructed flow channel
Correct siting verified relative to cesspit or inspection chamber position
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
High areas like Mutlaa need a metal valve rated for high pressure. Cheap plastic valves fail under repeated pressure. We size and rate the valve based on site depth and drain run length.
No, we fit the valve on the strongest pipe section closest to the house. If the pipe is weak toward the public network we suggest repairing or replacing that section only.
