Pre-work camera check
Camera inside the pipe locates the exact blockage point before the machine runs

Capital
Machine unblocking in Sharq starts by sending a camera inside the pipe to locate the blockage and identify the material before running the machine. We select the cutting head to match the blockage type, then re-run the camera to verify the line is clear.
In Sharq's tall residential towers, vertical drain lines are narrow and blockages often come from grease and tissue piling up in bends and offsets. We feed the camera from a roof opening or an intermediate inspection port in the building wall. Precision cutting heads matter here because narrow pipes can be damaged by brute force.
Sharq sits in Kuwait governorate, a high-rise dense zone where vertical sewer stacks form a critical part of building infrastructure.
Before running the machine, we verify pipe bore on camera to avoid sending a cutter head larger than the pipe can accept.
Camera inside the pipe locates the exact blockage point before the machine runs
Rotating cutter head breaks the obstruction and drives it through the line
Machine reaches deep blockages in the main sewer line beyond floor-level access
Sand, grease and wipes removed from blocked floor waste outlets
Second camera pass confirms the clear line on screen before the team leaves
Machine clearing for restaurant kitchens, residential complexes and office buildings
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, we use a small, quiet cutting head. The machine runs at low speed with minimal noise. We notify the building management beforehand and the job usually takes an hour.
We disassemble the head and cable into small sections to carry through the corridor. We reassemble them at the inspection port. It takes extra time but avoids breaking walls or doors.
