Pipe routing
Mapping every copper run before walls are plastered over

Hawalli
Central gas installation in Nuqra requires identifying the best pipe route from the supply point to every gas outlet in the home. We pressure-test and check all joints, recording test data before wall work covers everything.
Nuqra homes old and new often have large kitchens with multiple burners and gas heaters in bathrooms and rooms. We start with a full site survey to identify consumption points first, then chart the shortest route that avoids load-bearing columns and existing services. Copper pipe resists corrosion and stays flexible in timber and stone floors.
Nuqra lies in Hawalli governorate near Salmiya, a residential area where older and newer homes stand side by side.
Test pressure, duration and technician names are logged on the handover sheet because any later pressure drop signals external damage.
Mapping every copper run before walls are plastered over
Branching the network to each appliance position per plan
Fitting an isolation valve at every outlet for future servicing
Dry nitrogen charge and pressure hold test before handover
Core drilling wall openings and securing pipes with correct clips
Recording final pipe routes for future maintenance reference
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Pipe diameter is chosen by expected gas flow to each appliance, and a large oven needs a dedicated branch straight from the main valve. If we run thin pipes to a high-demand appliance, pressure drops at the other equipment.
Cooking and heating gas has no natural smell, but the gas company adds a very sharp-smelling chemical for quick leak detection. A strong garlic-like smell means a small leak that must be stopped immediately.
