Pipe routing
Mapping every copper run before walls are plastered over

Farwaniya
Central gas installation in Rabiya extends from the main supply meter through copper pipes to every cooktop, water-heater and heating outlet before finishing work ends. We pressure-test with compressed air then run live gas to verify weld quality and joint integrity.
Rabiya homes are medium villas with modern designs and multiple storeys, featuring main kitchens and living areas needing multiple gas outlets. We start by fixing the main meter near the external entrance, then run primary branches through protected external and internal walls. We select pipe routes to avoid intersecting electrical and plumbing runs, and secure brackets every one and a half metres.
Rabiya sits in Farwaniya governorate as a developed residential zone with modern villas and improved services.
Every brazed joint is visually inspected under bright light before the system is filled with compressed air.
Mapping every copper run before walls are plastered over
Branching the network to each appliance position per plan
Fitting an isolation valve at every outlet for future servicing
Dry nitrogen charge and pressure hold test before handover
Core drilling wall openings and securing pipes with correct clips
Recording final pipe routes for future maintenance reference
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No, copper pipes cannot bend under pressure as they may crack. We use pre-bent metal fittings at 45 and 90 degrees, every joint brazed with phosphor bronze for full safety integrity.
We hold pressure for a long period to detect any drop, then manually inspect each joint using soapy solution that reveals tiny bubbles. If pressure remains steady and no bubbles appear, the network is safe and ready for live gas.
