Pipe routing
Mapping every copper run before walls are plastered over

Farwaniya
Gas network in Shadadiya runs from the main meter at the building facade to every outlet on upper floors. We lay copper tubes horizontally under floors and vertically within columns before walls are closed. We test each branch with a pressure gauge, flush debris from pipes and hand over only when all systems pass inspection.
Shadadiya on Farwaniya's outer edge has larger homes with densely packed water and electrical runs under floors. Gas tubes here must avoid crossing existing copper and steel lines. We carefully inspect ground-floor pours and map new gas routes on a diagram before moving to upper levels.
Shadadiya lies in outer Farwaniya governorate, a district of spacious houses built on thick concrete foundations.
We blow pipes clean with compressed air before final connections because solder particles and oxidation damage sensitive appliance valves.
Mapping every copper run before walls are plastered over
Branching the network to each appliance position per plan
Fitting an isolation valve at every outlet for future servicing
Dry nitrogen charge and pressure hold test before handover
Core drilling wall openings and securing pipes with correct clips
Recording final pipe routes for future maintenance reference
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No, safety codes forbid it. Tubes must run above the pour or inside prepared ducts. If the floor is already cast we route pipes on the surface with protective covers instead.
About one hour for a medium network: filling tubes, building pressure, holding steady state then final readings. If pressure drops we locate and repair the leak.
