Pressure diagnosis
Pressure measured at multiple points to pinpoint exactly where the fault lies

Jahra
Low water pressure at Sulaibiya Industrial requires checking heavy supply lines and large industrial valves. We test pressure at the building inlet and in each industrial section to find the cause of loss. We open large joints, backflush scale and test every valve before restart.
Industrial buildings in Sulaibiya Jahra use large water volumes for cooling and cleaning, with very wide-bore pipes and multiple distribution valves. Large copper pipes accumulate mineral scale quickly when water is hard, and one valve can block completely. We test pressure at each main valve separately to identify blockage, then disassemble that valve and clean it fully with mild chemical flush.
Sulaibiya Industrial sits in Jahra governorate and houses large factories and workshops requiring constant water pumping.
We measure flow rate in litres per minute at each valve to identify which one delivers reduced flow.
Pressure measured at multiple points to pinpoint exactly where the fault lies
Transfer pump, pressure switch and expansion vessel checked and set correctly
Mineral scale cleared from pipes, pressure reducers and aerators blocking flow
Pressure-reducing valve inspected, adjusted or replaced if it restricts supply
Tank level, float valve and inlet pipe verified to rule out supply shortfall
Pressure confirmed at all outlets after repair before the visit closes
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Often yes, old valves corrode internally and restrict flow, and scale builds up faster inside them. We test each valve separately to find blockage, then clean or replace it as needed.
Not necessarily. We can divide work by closing distribution valves gradually section by section, cleaning one while others run. This cuts shutdown to a few hours instead of a full day.
