Dripping mixers
Source diagnosed; cartridge or seals replaced only as needed

Capital
Mixer repair in Daiya starts by finding where the leak or flow loss occurs before replacing any part. We disassemble the head, clear the aerator and seat from scale and deposits, test the valve. If the fault is in the mixer body we fix or replace it based on the damage.
Dense Daiya houses have compact kitchens with overhead mixers fitted straight to ceiling tanks or vertical risers. These faucets face high pressure from the tank header, and flow usually stops because limescale blocks the small ports. We strip the mixer head, clean each port carefully and test hot and cold water together before reassembly.
Daiya lies near the British School of Kuwait, a densely built residential zone where most houses share similar layouts.
We test the mixer under full tank pressure because Daiya water carries a high mineral content.
Source diagnosed; cartridge or seals replaced only as needed
Scale cleared from aerator, filter and internal mixer channels
Fault located in mixer, supply valve or feed pipe
Hot and cold channels checked and balance corrected
Old unit removed, new one fitted and pressure tested after
Valve behind each fixture checked for full shut-off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We clean the ports and valve first and test. Most Daiya mixers return to normal flow after scale removal. If flow stays weak we replace the entire mixer.
The temperature valve needs balanced pressure between hot and cold lines, and deposits disrupt this balance. We disassemble and inspect the cartridge inside, clean it or replace it if damaged.
