Dripping mixers
Source diagnosed; cartridge or seals replaced only as needed

Mubarak Al-Kabeer
Mixer repair in Masayel usually starts with a leak under the sink or weak hot water. We disassemble the faucet head, inspect the disc cartridge, springs and seals, replace only the faulty part and reassemble before testing.
In Masayel homes, kitchen mixers are mounted on marble or ceramic sinks via rigid pipes running under the worktop to the wall. When they leak, the underside must be accessible to disassemble the faucet from below. We check if the metal supply pipe is bent or if compression fittings have worn, and sometimes find hot water leaking from the pipe itself rather than the faucet head.
Masayel lies in Mubarak Al-Kabeer governorate, a residential zone with modern apartment blocks fitted with fixed-position kitchen mixers.
Every repaired mixer is tested by running cold and hot water together for two minutes to confirm there is no leak.
Source diagnosed; cartridge or seals replaced only as needed
Scale cleared from aerator, filter and internal mixer channels
Fault located in mixer, supply valve or feed pipe
Hot and cold channels checked and balance corrected
Old unit removed, new one fitted and pressure tested after
Valve behind each fixture checked for full shut-off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
In most cases the mechanism is straightforward; we disassemble, inspect seals, springs and the cartridge, and replace only what has worn. Full replacement is rare unless the metal body is cracked or internal threads are stripped.
Often the hot water inlet inside the faucet is partly blocked by limescale or rust. We disassemble the head, clean the inlet with mild acid and check the supply line under the sink.
