Dripping mixers
Source diagnosed; cartridge or seals replaced only as needed

Jahra
Mixer repair in Sulaibiya starts with testing pressure, temperature and leaks from handles and outlet. We disassemble the head, inspect seals, pistons and the cartridge inside, then replace only the worn parts. Grey water and minerals in Sulaibiya wells corrode ceramic valves quickly.
In Sulaibiya desert homes, the kitchen mixer must handle hard water and fine sand that enters from supply points. We pressure-test both hot and cold feed lines before fitting the mixer, because debris in pipes blocks the tiny perforations in the aerator. Where the mixer drips, we open the body and descale the seals and pistons instead of replacing the whole unit.
Sulaibiya is a desert area in Jahra governorate, where deep well water is rich in salts and heavy minerals.
Mixer heads are cleaned of scale twice yearly because hard water deposits build up fast in the perforations.
Source diagnosed; cartridge or seals replaced only as needed
Scale cleared from aerator, filter and internal mixer channels
Fault located in mixer, supply valve or feed pipe
Hot and cold channels checked and balance corrected
Old unit removed, new one fitted and pressure tested after
Valve behind each fixture checked for full shut-off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Salts dissolved in well water collect on the seals and pistons inside the cartridge, narrowing the outlet perforations. We disassemble the mixer and soak its parts in mild acid cleaner, then brush the holes gently clean.
Yes, because very hard water causes faster wear than other areas. We recommend cleaning the mixer head every six months and checking pistons for cracks and corrosion.
