Draining and deep clean
Sediment, algae and corrosion residue removed before any prep begins

Ahmadi
Epoxy tank lining in Eqaila includes draining and removing deposits with vigorous scrubbing. We inspect the base and walls for old leak marks, then sand the entire inner surface and apply protective epoxy.
Eqaila tanks sit on modern apartment buildings and often face polluted air from nearby highways. Contaminants and dust settle on the water and drop to the floor, accelerating concrete decay and coating build-up. We scrape the thick sediment layer, then coat with epoxy that repels new pollutants and protects concrete from reacting with them.
Eqaila is a commercial and residential zone in Ahmadi governorate close to highways and major shopping centres.
Before coating we blast the walls with high-pressure water to remove all dust and fine sediment.
Sediment, algae and corrosion residue removed before any prep begins
Walls and floor abraded so the epoxy bonds without lifting or bubbling
Two-coat system builds uniform thickness across all internal surfaces
Fine cracks sealed with filler compound before coating, not over them
Internal camera confirms full coverage and detects any early delamination
Tank refilled only after the epoxy has fully cured, confirmed on site
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We use a wide brush to spread epoxy from bottom to top, then inspect the surface under strong light after drying. Any thin spots are re-coated before handover.
Epoxy cures quickly and is not harmed by air once curing starts. But we cover the tank opening with clean cloth for several hours to prevent dust settling on it while it is still wet.
