Crack mapping by camera
Internal camera maps every crack and its depth before work begins

Mubarak Al-Kabeer
Fibreglass tank repair in Mesila requires careful inspection for cracks that may be tiny but grow fast under water pressure. We drain fully, inspect every centimetre of the inner surface, pinpoint cracks and flaws and apply a lasting sealed repair.
The Mesila waterfront has large villas and hotels using big fibreglass tanks on high roofs. The coastal environment and salt make repair harder because the outer layer erodes quickly. We focus on inlet areas and deep corners where sediment collects and corrosion begins.
Mesila sits near Mesila Beach Hotel and Green Island in Mubarak Al-Kabeer governorate, where tanks face salt and salty winds on an ongoing basis.
We fill the repaired tank very slowly and watch for any visible seep on the outer surface for ten straight hours.
Internal camera maps every crack and its depth before work begins
Grinding the area around the crack ensures the resin bonds properly
Resin-saturated glass-mat layers fill the crack and restore structural stiffness
Delaminated sections are removed and rebuilt with matching laminate material
Full interior coat with epoxy rated safe for potable water contact
Camera confirms no remaining cracks or coating bubbles before the tank refills
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, salt eats away the protective outer layer of fibreglass, weakening walls and making them prone to pressure cracks. Annual inspection of the outer surface is essential to prevent inner cracks from developing.
Yes, after repair we apply a protective resin layer to the outer surface to reduce salt corrosion. This coat needs renewal every two to three years in harsh coastal conditions.
