Fill valve
Adjusted or replaced when filling is slow, noisy or never stops.

Jahra
Cistern repair in Qasr includes checking welded seams and rust on tank shell and isolating pipes from external moisture. We test flush and fill, verify no water escapes from tank base into the foundation.
Most Qasr houses are relatively new with cisterns sited on exposed roofs or in poorly ventilated rooms. Direct sun and humidity accelerate rust on metal tanks, especially at seams. We also check drainage pipes that may touch the tank shell directly with no insulation, transmitting noise and vibration. We wrap pipes with foam tape if needed to reduce noise.
Qasr is a growing residential area in Jahra governorate with mid-rise buildings where roof cisterns face weather exposure.
We inspect the entire tank shell for rust spots and test all welded seams under full pressure.
Adjusted or replaced when filling is slow, noisy or never stops.
Repaired when water trickles constantly from cistern to pan.
Set or replaced to restore the correct water level inside.
Checked and reseated when the joint leaks at floor level.
Broken or loose seats replaced on the same visit.
Wax or rubber seal replaced when water pools at the base.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Not immediately, but it signals the tank may leak soon. We touch it and scrape with metal to see if it is deep flaking rust. If just surface rust, we clean and apply protective paint.
The outlet pipe vibrates where it meets the tank body. We separate the pipe slightly and seat it in a rubber clip to absorb vibration. Alternatively we wrap the contact point with foam insulation.
