Acoustic surface scan
Tracing the leak sound through tile and screed layers

Mubarak Al-Kabeer
Leak detection under tiles in Adan focuses on coastal zones where high humidity masks true pipe leaks. We measure relative moisture and isolate the water source logically before any breaking.
Houses and flats near Adan Co-op sit on damp clay soil due to proximity to the sea. Moisture seeps from the foundation into inner walls and floors, so it cannot be told apart from pipe leaks with the naked eye. We test cold and hot lines separately under high pressure and measure moisture before and after to see which one raised actual dampness.
Adan in Mubarak Al-Kabeer sits near the seafront where foundation and ground moisture is a core issue in isolating leaks.
We isolate supply lines during testing because running warm and cold water together raises air humidity and distorts the reading.
Tracing the leak sound through tile and screed layers
Isolating the suspect line and measuring pressure drop to confirm fault location
Filming inside the pipe from the nearest access point to view the crack
Marking the exact spot on the tile surface to minimise breaking area
Checking pipe branches hidden inside the adjacent ceiling or wall
Handing the confirmed location directly to the repair team
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Not always in Adan. Moisture may come from the foundation, an air conditioner or the sea itself. We pressure-test the pipes and measure humidity before and after to know if pipes are the cause.
The first scan with the detector takes twenty to thirty minutes to trace pipes and measure moisture. If we need a pressure test we add another fifteen minutes and wait for results.
