Acoustic surface scan
Tracing the leak sound through tile and screed layers

Ahmadi
Leak detection under tiles in Fahad Al-Ahmad begins with an acoustic sensor placed on the surface above the suspected area. We hear running water and pinpoint the wet pipe exactly without touching the tiles. This saves you from breaking an entire floor to find the source. We record the location with a diagram before the next step.
In modern Fahad Al-Ahmad homes, main pipes run beneath tiles from the roof tank to kitchens and bathrooms, and slow leaks there may not show immediately but cause floor dampness. We use the acoustic detector to identify the exact pipe line and diameter from the sound it makes, then scan surrounding areas for moisture patches or tile discolouration. Once we find the leak we chalk-mark the floor to show the full path of the damaged pipe.
Fahad Al-Ahmad lies in Ahmadi governorate, a newer residential suburb where modern under-tile runs are standard in most houses.
We test the acoustic detector on a known pipe first because the sound signature changes with pipe diameter and material.
Tracing the leak sound through tile and screed layers
Isolating the suspect line and measuring pressure drop to confirm fault location
Filming inside the pipe from the nearest access point to view the crack
Marking the exact spot on the tile surface to minimise breaking area
Checking pipe branches hidden inside the adjacent ceiling or wall
Handing the confirmed location directly to the repair team
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
The acoustic detector pinpoints horizontal location and sound signature precisely, but depth is estimated from known tile thickness and the base layer. If needed we use a moisture test to confirm depth before any breaking begins.
Joint leaks make a different sound from open splits, and our device detects the difference. We pinpoint the joint location precisely and mark a small circle above it to show the only spot that might need breaking.
