Acoustic surface scan
Tracing the leak sound through tile and screed layers

Jahra
Leak detection under tiles in Old Jahra faces the challenge of aged houses and corroded metal pipes. We use advanced scanners to pinpoint leaks in old walls and floors precisely. This protects the historic structure from random breaking and unnecessary demolition.
Houses in Old Jahra near the old market are built in traditional styles with aged copper pipes and stone floors and tiles dating back decades. Old pipes rust inside and develop tiny pinholes over years. When moisture appears on a wall or corner, the leak source may be very old and very small. We use thermal cameras and sensitive sonic sensors to find these pinholes without destroying the old floors.
Old Jahra lies beside Al Jahra Fort and the old market, a historic built area of traditional structures.
We use high-sensitivity sonic sensors because pinholes in old pipes emit very faint noise.
Tracing the leak sound through tile and screed layers
Isolating the suspect line and measuring pressure drop to confirm fault location
Filming inside the pipe from the nearest access point to view the crack
Marking the exact spot on the tile surface to minimise breaking area
Checking pipe branches hidden inside the adjacent ceiling or wall
Handing the confirmed location directly to the repair team
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No, we use entirely non-invasive devices. We place sensors only on the surface and do not drill or break anything during inspection. Once the leak is pinpointed precisely, you choose the repair method.
Solid copper can be safely patched using small copper sleeves. Once the pinhole is identified, we measure its size and corrosion around it, then advise patching or replacement based on the condition.
