New pipe runs
Cold and hot supply lines routed to fixtures and tanks.

Hawalli
Water pipes in Shaab near the park face challenges from high humidity and salty winds that cause rapid corrosion. We use salt-treated pipes and focus on tight-sealed joints and rust-resistant clips. Pressure and leak tests run every six months in beachfront areas.
Buildings in Shaab near the sea need extra pipe protection from rust and corrosion. We choose pipes with an outer protective layer and coat them with insulation before fixing with galvanized steel clips. High humidity makes it vital to open vent points in upper lines to prevent stagnant water pooling that causes internal rust.
Shaab is a beachfront area in Hawalli where salt and humidity test the durability of every metal component in the line.
New lines are flushed with filtered fresh water for hours before commissioning because any salt residue speeds corrosion.
Cold and hot supply lines routed to fixtures and tanks.
Leak located acoustically and by camera before any breaking.
Wrapping exposed or roof-level pipes against heat and condensation.
Removing mineral scale that narrows the pipe wall over time.
Targeted clearance of blocked supply lines without unnecessary breaking.
Internal camera pass and pressure check before pipes are concealed.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, plastic is not affected by salt directly, but metal fittings and valves need protection. We use insulated double connectors between plastic pipes and copper components to stop corrosion transfer.
At least every six months, we inspect spots where water pools and joints exposed to wet air. We replace any pipe whose outer layer begins to crack before a leak starts.
