Current pump assessment
Checking amperage, pressure and mechanical condition before any decision

Jahra
Cesspit pump installation in New Jahra has to protect the control panel as much as the pump. In houses near Jahra Mall and New Jahra Co-op, the panel often ends up on an outside wall, where summer sun and fine dust shorten the life of contactors and float relays.
A panel box in direct sun can get far hotter than the air around it, and dust entering through a poor seal settles on contacts and causes erratic switching. In New Jahra we mount the panel on a north-facing or shaded wall where possible, use an enclosure with proper gaskets and cable glands, and add a sun hood where no shade exists. Contacts are checked for dust at every service visit.
New Jahra is a residential district of Jahra Governorate, near Jahra Mall, Jahra Hospital and New Jahra Co-op.
Control panels go on a shaded or north-facing wall where possible, with a sun hood added where there is none.
Checking amperage, pressure and mechanical condition before any decision
Sizing by pit volume, depth and discharge pipe diameter
Discharge line fitted with a non-return valve and sealed joints
Moisture-rated connection suited to a submerged cesspit environment
Float set to correct on and off levels to prevent dry running
Pit filled and a full pump cycle run before the technician leaves
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Heat in the control panel is a likely cause, tripping an overload or making a relay misbehave. Shading or relocating the panel often solves it.
Yes, if a cable route to a service room or garage is practical. Indoors it stays cooler and cleaner, which suits the electrics well.
