Current pump assessment
Checking amperage, pressure and mechanical condition before any decision

Ahmadi
Cesspit maintenance in Maqwa targets aging systems in harsh terrain near oil fields. We inspect the tank, pump and pipes under high temperatures and test all joints for leaks before moving to the next call.
Maqwa is a mixed industrial and residential area with houses and villas scattered far apart, each with its own cesspit system. The extremely hot climate here stresses pipes and tanks, causing thermal cracking. Pumps often run continuously in summer, so we clean the filter weekly and inspect metal pipe joints for rapid corrosion. We check that the ground around the tank is level to prevent water pooling and moisture that accelerates decay.
Maqwa is a district in Ahmadi governorate near KOC oil fields, exposed to extreme heat and demanding operational conditions.
We pressure-test tanks and pipes because heat increases the risk of cracking and leaking.
Checking amperage, pressure and mechanical condition before any decision
Sizing by pit volume, depth and discharge pipe diameter
Discharge line fitted with a non-return valve and sealed joints
Moisture-rated connection suited to a submerged cesspit environment
Float set to correct on and off levels to prevent dry running
Pit filled and a full pump cycle run before the technician leaves
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, high heat accelerates seal and winding degradation. In Maqwa we recommend pump replacement every three years instead of five, and keeping the pump location well ventilated.
We use rigid plastic pipes with proper underground bedding to prevent stress and flexing. We also ensure tank vent holes stay open to reduce internal heat pressure buildup.
