Live pressure reading
Measuring cut-in and cut-out values before touching anything

Jahra
In Mutlaa, pressure switch repair must handle long water runs from tank to house crossing rough terrain. We measure height difference and distance, check the switch, and set pressure based on true elevation and pipe length.
Mutlaa houses scatter across hillside with each tank at a different height. The water line from well or central tank rises and falls with the ground, meaning pressure is uneven throughout the house. The switch at tank level reads one pressure but distant taps feel another. We map the highest and lowest points in the line before setting the switch because differences reach several bar.
Mutlaa sits in Jahra governorate as a scattered rural district on hilly terrain where house elevations vary widely.
We calculate the height difference between highest and lowest point in the pipe run and add it to the switch reading before final adjustment.
Measuring cut-in and cut-out values before touching anything
Testing the air bladder charge and refilling it if pressure is lost
Cleaning contacts or fitting a new switch matched to pump capacity
Calibrating both thresholds precisely to prevent rapid on-off cycling
Inspecting wiring and terminal resistance at both switch contacts
Running the pump and confirming stable pressure through a full cycle
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Not necessarily. Weak pressure at height may be due to the house elevation or long pipe run. We measure pressure at the tank with a test gauge and compare it to pressure at the outlet; if the difference is proportional, the switch is fine.
If tank pressure is adequate but house elevation is steep, then yes, a small booster pump compensates for height loss. But first we make sure the current switch is properly set and not wasting water by cutting out too early.
