Tank and line check
Tank size and pipe run checked before any pump is chosen

Ahmadi
Roof tank pumping in Bnaidar starts with assessing the tank, checking current pressure, connections and motor condition. We select a pump suited to building height and distance to wells, fit it and run full pressure tests.
Bnaidar is a desert zone in eastern Ahmadi with scattered buildings and old wells with galvanized pipework. The roof tank here may be wind-damaged and sand-infiltrated, and the pump needs strength to draw from wells that may be deep with low pressure. We check tank body for cracks, inlet and outlet pipes, air vents and float valves.
Bnaidar lies in eastern Ahmadi, where wells run deep and tanks face wind and desert sand pressures.
Suction lines from well to pump must have large bore to reduce pressure drop over long distances underground.
Tank size and pipe run checked before any pump is chosen
Type and capacity matched to actual tank height and demand
Pump seated on isolation pads to stop vibration reaching the structure
Inlet and discharge lines fitted with non-return and isolation valves
Outlet pressure measured and confirmed stable under normal fixture load
All joints inspected for leaks before the job is signed off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Small surface cracks can be welded and sealed, but deep ones through tank walls need replacement. We pressure-test first to gauge damage severity.
Very much so, fine sand enters settling tanks then pumps and blocks passages. We fit multi-stage inlet filters and recommend regular tank cleaning.
