Fault diagnosis
Element, thermostat and wiring tested before any parts are removed

Ahmadi
An electric heater in Dabaiya may stop producing hot water for many reasons starting with a faulty heating element or broken thermostat. We check current, grounding and connections before diagnosing the issue. Repair might be element replacement or rebuilding an entire electrical circuit.
Dabaiya is a southern Ahmadi zone with family houses, small workshops and storage units. Heaters here range from one hundred litres for a family home to three hundred for a warehouse. Old wiring in many buildings carries overload when the heater and other appliances run together. We check the main breaker first, then trace the wire from switch to unit and test each connection and joint.
Dabaiya sits in southern Ahmadi governorate where mixed buildings of homes and workshops need heaters of varied capacity.
We test the main breaker first because its failure can cut power to the heater without showing other signs.
Element, thermostat and wiring tested before any parts are removed
Scaled or burnt element removed and a matched replacement fitted
Thermostat tested and adjusted or replaced if it no longer cuts off correctly
Leak located with camera; tiles are not broken unless the pipe itself is cracked
Calcium sediment drained from the tank base to restore heating capacity
Temperature and pressure confirmed in front of the customer after repair
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
The cause is usually that old wiring is too thin and each appliance drawing extra current raises heat in the wire. The main or branch breaker trips when limits are exceeded. We recommend checking wire size and upgrading the breaker if undersized.
We check the wire from breaker to heater directly and test its resistance and insulation. If we find a circuit issue we suggest repair steps. Large-scale rewiring or foundation work may need a specialist electrician.
