Fault diagnosis
Element, thermostat and wiring tested before any parts are removed

Ahmadi
Electric heater repair in Ruqqa requires checking the heating coil, copper pipes and electrical wiring. We test every connection for leaks and measure outlet temperature. Full hot water returns after accurate diagnosis.
Ruqqa family homes have heaters mounted on kitchen and ground-bathroom ceilings, with pipes running horizontally often without proper fall. When heating stops we first check whether the solenoid valve is clogged with deposits or the thermostat is not signalling. We test electrical connections with a meter and flush cold water from the lower tap to clean the strainer.
Ruqqa sits in Ahmadi governorate, an older residential district with heavy use of ceiling-hung heaters.
We test the thermostat with an electrical continuity tester because repeated switching usually means loose contact on the live wire.
Element, thermostat and wiring tested before any parts are removed
Scaled or burnt element removed and a matched replacement fitted
Thermostat tested and adjusted or replaced if it no longer cuts off correctly
Leak located with camera; tiles are not broken unless the pipe itself is cracked
Calcium sediment drained from the tank base to restore heating capacity
Temperature and pressure confirmed in front of the customer after repair
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
If it never heats the fault is in the coil or thermostat. If it heats then cools the solenoid is shutting early. We run the unit twice in a row to see the pattern.
The noise is from thermal expansion in the tank and copper pipes and is normal. If very loud the tank may vibrate from loose pipe brackets.
