Burner inspection
Clean and adjust the burner for even, complete ignition every cycle

Capital
Gas heater repair and service in Doha includes checking the gas line from the main regulator, the inner burner, exchanger and insulation. We test ignition, temperature control and safe exhaust venting before handover.
The Doha area near the port and closer to the gulf faces high humidity affecting heater metals and burners. We inspect the heat exchanger walls for rust and treat it with chemical cleaning if needed. Burners here need regular checks because salt air reduces ignition efficiency and dirty electrodes.
Doha is a commercial and residential district near Doha Port and the Fifth Ring Road with mixed apartment and office buildings.
We polish ignition electrodes with a brass brush to restore strong spark before every test run.
Clean and adjust the burner for even, complete ignition every cycle
Test every joint with detection solution to locate any minor leak
Inspect the flue path and confirm combustion gases exit the space
Measure thermostat accuracy and test the thermal cut-off safety valve
Check the tank body and the sacrificial anode for corrosion progress
Measure incoming water pressure and confirm it suits the unit's rating
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, salt and humidity cause surface rust on the exchanger and burner. We apply protective coating and clean electrodes regularly to prevent ignition failure and corrosion spread.
We recommend inspection every three months due to salt and humidity exposure. Each visit includes electrode cleaning, burner inspection, pressure testing and ignition verification.
