Burner inspection
Clean and adjust the burner for even, complete ignition every cycle

Jahra
Gas heater inspection in Qaisariya includes the burner, heat exchanger, regulator, pipework and drain security. We verify gas pressure and test all joints before restart.
Qaisariya is a residential area in Jahra with family houses and villas having wall-mounted heaters. Local water is somewhat hard, so limescale deposits on the heat exchanger surface and cuts heat transfer efficiency. We inspect the exchanger for buildup and clean it with a chemical solution, checking water pipes for blockages that slow flow.
Qaisariya in Jahra governorate is a family residential area where residents rely on gas heaters for water heating.
Water flow from the heater outlet is measured in a graduated container to assess exchanger blockage.
Clean and adjust the burner for even, complete ignition every cycle
Test every joint with detection solution to locate any minor leak
Inspect the flue path and confirm combustion gases exit the space
Measure thermostat accuracy and test the thermal cut-off safety valve
Check the tank body and the sacrificial anode for corrosion progress
Measure incoming water pressure and confirm it suits the unit's rating
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Not recommended, as strong cleaners may damage internal metals. We use safe specialized solutions and soak the exchanger properly for complete removal.
About two hours if heavy limescale is present. We disassemble the burner and exchanger, clean both, reassemble and test performance with running water.
