Burner inspection
Clean and adjust the burner for even, complete ignition every cycle

Jahra
Gas heater service in Taima covers the complete cycle from gas supply through burner ignition and temperature control. We verify all connections and valves are secure, testing pressure and safety systems before finishing.
In Taima's desert areas, gas heaters operate in harsh conditions of high heat, low humidity and fine dust. We check the burner for dust clogging the small orifices and clean feed filters regularly. Copper pipes face daily expansion and contraction, so we check for cracks or leaks at every joint.
Taima is a desert suburb of Jahra governorate, where heating systems need special care against dust and climate swings.
We test pipe leakage resistance under excess pressure for full minutes because small cracks may not show at normal pressure.
Clean and adjust the burner for even, complete ignition every cycle
Test every joint with detection solution to locate any minor leak
Inspect the flue path and confirm combustion gases exit the space
Measure thermostat accuracy and test the thermal cut-off safety valve
Check the tank body and the sacrificial anode for corrosion progress
Measure incoming water pressure and confirm it suits the unit's rating
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We replace feed filters roughly every three months and clean burner orifices of any fine deposits. We ask the owner to check the external tank filter monthly because of the high dust load in this area.
Yes, very high temperatures can affect ignition speed and thermostat response. We adjust pressure and ignition settings for the climate and check that the heater casing cools properly.
