Tank body inspection
Checking the outer shell and all joints for seepage or moisture

Jahra
A heater that starts dripping within weeks of installation is not unusual in new houses around New Jahra Co-op, and heater leak detection there usually lands on a threaded joint made in a hurry. Too little sealant, the wrong tape or a cracked fitting from overtightening are the usual culprits.
New heater connections combine brass heater bosses, metal valves and often plastic pipe adapters, and each needs the right sealing method. Tape wound the wrong way unravels as the joint is tightened, and plastic adapters forced too hard can crack invisibly, then open once the joint heats and cools a few times. In a new Jahra house we dry each joint, find the one that weeps, remake it with the correct sealant and torque, and check the others made the same day before the heater is closed in.
Jahra (New) is a growing residential district in Jahra governorate near Jahra Mall, Jahra Hospital and New Jahra Co-op, with many newly fitted homes.
Plastic adapters overtightened into a heater can crack unseen and only weep after a few heating cycles.
Checking the outer shell and all joints for seepage or moisture
Pinpointing concealed leaks by sound without opening the wall
Running a camera into supply or drain lines to trace the moisture source
Inspecting inlet, outlet and surrounding fittings for weeping joints
Checking the area around fuel or power entries for secondary moisture sources
Delivering a clear finding on where the leak is and what repair is needed
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
More often a threaded joint was made poorly, so we find the weeping joint and remake it before judging the heater.
A cracked adapter or poorly sealed thread may hold at first and open after the joint heats and cools a few times.
