Tank body inspection
Checking the outer shell and all joints for seepage or moisture

Capital
Heater leak detection in Kuwait City starts with a thorough inspection of the tank body, fittings and all connected pipework. We pinpoint the exact leak source before damage spreads to insulation or surrounding walls. We test each joint under pressure and document the leak location clearly before recommending repair.
Kuwait City's high-rise residential blocks near the towers and central areas often house water heaters on roofs or in tight utility rooms. In these confined spaces we use thermal imaging to spot cold patches around the tank body, copper lines and hose connections, because moisture first shows as slight temperature differences. We gradually open each fitting and test water flow from every one to isolate the leak before it reaches adjacent walls.
Kuwait City, the capital, contains older and mid-rise buildings where heater access is tight and leak detection demands precision work.
We blow compressed air through the pipes then spray soap solution on every fitting to spot bubbles and locate the source quickly.
Checking the outer shell and all joints for seepage or moisture
Pinpointing concealed leaks by sound without opening the wall
Running a camera into supply or drain lines to trace the moisture source
Inspecting inlet, outlet and surrounding fittings for weeping joints
Checking the area around fuel or power entries for secondary moisture sources
Delivering a clear finding on where the leak is and what repair is needed
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We test each fitting with a wrench and tighten gradually while watching for the leak to stop. If water still drips from the tank body itself, that points to metal corrosion from age or water quality.
A leak from the body cannot be patched because corrosion continues beneath the surface. We recommend replacement before a full rupture floods the floors below or damages contents.
