Tank body inspection
Checking the outer shell and all joints for seepage or moisture

Ahmadi
Leak detection on water heaters at Shuaiba Industrial starts by checking damp patches on the tank body and fittings. We trace water flow through the supply and return pipework using a light probe. We pinpoint the exact leak source before corrosion spreads.
Shuaiba Industrial has factories and stations with large heaters mounted on thick concrete or metal pads with industrial drain systems. A leak from a fitting or valve can travel across the solid floor without showing directly beneath the tank. We inspect every joint and valve with hydrostatic flushing and smoke detection, then trace the water path to its discharge point to find the source.
Shuaiba Industrial sits in Ahmadi governorate near the KIPIC petrochemical complex, a zone with large heating tanks and complex piping networks.
We pressure-test both supply and return lines at full pressure for ten minutes to confirm the leak location with precision.
Checking the outer shell and all joints for seepage or moisture
Pinpointing concealed leaks by sound without opening the wall
Running a camera into supply or drain lines to trace the moisture source
Inspecting inlet, outlet and surrounding fittings for weeping joints
Checking the area around fuel or power entries for secondary moisture sources
Delivering a clear finding on where the leak is and what repair is needed
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We inject smoke tracer into the lines to follow the water path beneath the surface. We watch for steam or dampness marks on the floor during testing, then pinpoint the exact location before any excavation.
Both. Water loss reduces pressure and heat output in the system and causes internal rust that weakens metal walls. Leaks near electrical connections pose a hazard to workers.
