Element condition check
Resistance measured to confirm whether element is scaled, shorted or open

Capital
Heating element and thermostat service in Rai covers shops and residential buildings near The Avenues and other malls. We check large heaters serving multiple units, remove the element and verify electrical resistance. We test the thermostat with an advanced meter, then replace what needs it.
The commercial Rai zone has residential buildings above shopping centers and clinics with large central heaters serving dozens of apartments. These systems have reliable thermostats but high hot-water demand raises tank temperatures. We remove the thermostat from the tank and measure its sensitivity by fully immersing the unit in hot water to verify activation temperature. The large electric element may lose power due to electricity fluctuations in the area, so we measure actual voltage before replacing.
Rai is a modern commercial zone near The Avenues, IKEA and the First Ring Road, where apartment buildings have central heating systems.
We measure incoming voltage to the heater and verify automatic power cutoff when dangerous tank pressure rises.
Resistance measured to confirm whether element is scaled, shorted or open
Cutout points tested and temperature calibration verified before fitting new part
Scale deposits inside the tank assessed as they reduce heating efficiency
Anode protects the tank from corrosion and is inspected at every service visit
Wiring and terminals inspected for safety before the new element is energised
Heater run and water temperature confirmed at the tap before the visit ends
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Failure signs include scalding hot water or cold water despite running the heater. We remove the thermostat and immerse it in hot water to listen for the click indicating power cut. If no click comes, the thermostat is faulty.
Not necessarily; the fault may be in pipe distribution between apartments rather than the heater itself. We first test hot-water pressure at the heater outlet and inspect isolated valves and connections. If pressure is good the problem is in distribution, not the element.
