Collector panel check
Absorber tubes, flow channels and surface condition inspected for faults

Jahra
Solar heater repair on the Mutlaa ridge starts with checking tubes exposed to cold nights and harsh day heat. We trace the hot line from the hillside panel to tank and fix fractures and leaks from temperature swings.
Houses on Mutlaa heights are elevated, so their solar panels face sharp day-to-night temperature swings. Copper pipes expand and contract, stressing solder joints, and in winter cold dew collects on exposed metal tanks. We test every joint with special attention to bare pipe runs and add thermal wrap if missing to protect water from heat loss and possible freezing.
Mutlaa sits in Jahra governorate as an elevated desert landscape where nights are cold and days are very hot.
We measure thermal wrap thickness on tank and exposed pipes with a gauge because thin insulation loses significant heat at night.
Absorber tubes, flow channels and surface condition inspected for faults
Tank body, thermal insulation layer and sacrificial anode condition assessed
Circulation pump, valves and connecting pipework between panel and tank
Thermostat calibration, expansion vessel pressure and safety valve checked
Acoustic and visual tracing of panel and pipe leaks before any breaking
Pressure and temperature test confirms full output is restored before leaving
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, we carefully scrape the old solder and re-solder with fresh alloy at higher temperature, then pressure-test the joint. If the break is in a highly exposed spot we may add a copper ring around the joint to prevent re-cracking.
Rarely because water comes from the relatively warm panel, but if solar circulation stops a surface ice layer can form. We increase insulation thickness on the tank top and advise draining a small auxiliary tank on very cold days.
