Site and capacity check
Capacity matched to actual household size and usage pattern

Farwaniya
Water heater installation in Rehab typically places the unit in a service room beside the kitchen or near the roof tank. We measure incoming pressure, test existing pipe runs, fit the new heater quickly and fill it, then check every joint before handing over the keys.
Rehab is a relatively modern family district with standardised villa designs. Most homes have a service bathroom beside the kitchen with the roof tank directly above, making heater feed runs straight and short. We measure existing copper pipes and connect the cold isolation valve close to the heater inlet for easy future maintenance.
Rehab lies in Farwaniya Governorate near the Rehab Co-op, a suburban villa district with planned urban layout.
The system is filled slowly from the cold tap while we watch for air bubbles until clean water runs from the air vent valve.
Capacity matched to actual household size and usage pattern
Secure fixing to wall or platform rated for the tank weight
Hot and cold lines connected with heat-rated fittings and isolation valves
Electrical or gas supply connected; ventilation verified for gas units
Pressure relief valve and expansion vessel fitted before pressurising
System filled and checked for leaks before final handover
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Usually 3 to 4 hours for full installation, fill and testing. If old pipes are in excellent condition we may finish slightly faster.
We shut only the main cold isolation valve before cutting pipes at the heater. The rest of the house keeps water, but bathrooms and kitchen lack hot water for a few hours.
