Floor gullies
Clearing bathroom, entrance and corridor gullies blocked by sand or hair

Jahra
Gully clearing in Jahra Industrial targets diverse discharge sources from food, textile, metal and plastic factories. Each factory has one or more gullies on the floor or roof, and each may contain a different type of contaminant. We identify the clogging material type, select the right cleaning method and test water flow under pressure.
Jahra Industrial factories discharge water containing starches, fibres and grease from food, metal oils and shavings from workshops, and plastic waste and fats from production lines. Gullies here may be collected in one line down the factory centre or spread along the outer plot boundary. We need precise knowledge of each site's drainage layout because clogs in one gully can spread to the main collection pipes.
Jahra Industrial lies in Jahra governorate, a large manufacturing zone housing multiple production lines and diverse waste streams.
We use a pipe camera before high pressure because some clogs need manual removal first before pumping.
Clearing bathroom, entrance and corridor gullies blocked by sand or hair
Breaking up congealed cooking grease that narrows or fully seals the kitchen line
Removing silted debris that wind deposits and rain then compacts into the gully
Filming the line before and after so the customer sees the difference on screen
Blasting solid deposits and flushing pipe walls with a concentrated water jet
Clearing trap sediment that lets drain odour back into the room when dry
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
If the gully serves multiple production lines, yes, we need to temporarily stop drainage from each line. We coordinate with factory management to minimize impact on production to under one hour.
Yes, we recommend installing fine meshes over gullies to trap fibres and solids, and fat separators for factories producing large volumes of oils. Regular maintenance of these devices reduces clogs significantly.
