Copper or steel pipe run
Correct diameter pipe sized to kitchen appliance load and inlet pressure.

Farwaniya
Kitchen gas in Andalus runs from the street meter under floor or along walls to the kitchen. We size pipe diameter by appliance count and distance and test every fitting under high pressure.
Andalus has small apartments and villas with meters typically on the street side away from kitchens. We run one copper line from the meter securing it with clips every metre to prevent rattle. We pressure-test from meter to the last appliance and verify pressure drop stays under one bar.
Andalus sits in Farwaniya near Fourth Ring Road, a compact residential district.
We check visible joints monthly because gas line vibration wears threads in the fittings.
Correct diameter pipe sized to kitchen appliance load and inlet pressure.
Individual outlet with isolation valve for each hob, oven or fryer.
Pipe run inside protective conduit or channel with ventilation clearance observed.
Joints finished by brazing or press-fit method suited to the pipe material.
Nitrogen pumped to test pressure and held to confirm every joint is tight.
Inspection of an existing run and repair of any corroded section or weeping joint.
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes but we leave at least ten centimetres between them. Heat from hot water weakens fitting threads over time. If space is tight we wrap the gas pipe in foam insulation.
At least twice, first at high pressure for a long soak and second gentle to check stability. If pressure drops on the first test we find and fix the leak before handing over.
