Hot and cold supply points
PPR lines routed precisely to basin, shower and toilet positions

Hawalli
Bathroom rough-in in Nuqra serves residential buildings with multiple flats per floor. We run supply lines from the main stack and waste lines from each unit to a single floor collector. We test pressure and flow in every unit before walls and floors are closed.
Nuqra apartment blocks are mid-rise with flats holding one or two bathrooms close together. Pipes run inside floor slabs between storeys in tight shafts, so we use 45-degree bends instead of sharp angles to cut pressure loss. Connections in tight shafts mean we choose thin-walled but strong pipe and brief the maintenance staff on how to access every joint if needed.
Nuqra lies in Hawalli governorate near Salmiya, a zone of close-packed apartment buildings with high residential density.
Each waste branch is tested with cold water flow for five minutes to confirm it is clear of blockages before handover.
PPR lines routed precisely to basin, shower and toilet positions
uPVC drain runs laid at correct fall to prevent standing water
Floor trap levels set before screed to align flush with final tiling
Connecting the waste run to the vent stack prevents trap siphoning and odour
Documented pressure test on supply lines before walls are permanently closed
All supply and waste point locations recorded for finishing and future maintenance
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We use thin-walled copper tubes and 45-degree bends instead of standard elbows. Tight shafts mean every joint must be soldered or crimped hard to withstand torque.
We leave inspection ports at each shaft end and at every direction change. These ports sit under removable tiles or behind bolted metal panels for quick access.
