Pressure diagnosis
Pressure measured at multiple points to pinpoint exactly where the fault lies

Farwaniya
Fixing low water pressure in Ardhiya Industrial starts with checking the main supply line from the meter. We inspect the strainer and isolation valves and measure pressure at different points across the system. This tells us whether the cause is blockage, a hidden leak or a problem with the roof tank.
Factories and warehouses in Ardhiya Industrial rely on large roof tanks to distribute water across multiple sections, and low pressure often starts in the long distribution pipes inside the building. We check the tank condition, float valve and branch pipes where sediment builds up. If pressure is weak in sections far from the tank we may suggest a booster pump to recharge the lines.
Ardhiya Industrial sits in Farwaniya governorate and covers a vast area of warehouses and heavy factories where each facility relies on its own distribution network.
We test pressure with a calibrated gauge on multiple lines because a single factory may have different pump points.
Pressure measured at multiple points to pinpoint exactly where the fault lies
Transfer pump, pressure switch and expansion vessel checked and set correctly
Mineral scale cleared from pipes, pressure reducers and aerators blocking flow
Pressure-reducing valve inspected, adjusted or replaced if it restricts supply
Tank level, float valve and inlet pipe verified to rule out supply shortfall
Pressure confirmed at all outlets after repair before the visit closes
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We measure pressure at the main entry point and then at the roof tank. If pressure drops between the two, the fault is in the supply line or meter. If pressure is strong at the tank but weak in the sections, the problem lies in the internal distribution.
Yes, if the pipes are old and water is hard, limestone deposits build up inside copper and steel tubes. We open pipe sections and run pressurized water backward to flush blockages, or replace sections that are too narrow to clear.
