Dripping mixers
Source diagnosed; cartridge or seals replaced only as needed

Ahmadi
Mixer repair in Ahmadi starts with pinpointing the leak or poor flow before touching any connections. We open the faucet head, inspect the disc, springs and seals, then replace only the damaged parts instead of changing the whole mixer. Full pressure testing confirms the fault is gone.
Ahmadi's older apartment blocks have long-reach mixers in kitchens with separate hot and cold taps, meaning the internal disc moves side to side to blend water. When water drips from the faucet base, it is usually a worn cylindrical seal or a split rubber ring. We unscrew the mixer from the spout and take the head apart at our workshop so your kitchen is not left open long.
Ahmadi is an industrial eastern city in Ahmadi governorate, home to oil company offices and many multi-storey residential buildings.
We test every mixer after installation because warm water in Ahmadi carries minerals that wear seals faster.
Source diagnosed; cartridge or seals replaced only as needed
Scale cleared from aerator, filter and internal mixer channels
Fault located in mixer, supply valve or feed pipe
Hot and cold channels checked and balance corrected
Old unit removed, new one fitted and pressure tested after
Valve behind each fixture checked for full shut-off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Usually trapped air in the pipe or small debris around the disc breaks the flow. We check both supply lines, clean the disc with a solvent and run the mixer at full pressure for final flushing.
Simple leaks from the faucet head we fix without disconnecting the pipes. But if the disc is cracked or the seal is badly worn, we unscrew the mixer and repair it at our workshop to ensure it holds.
