Dripping mixers
Source diagnosed; cartridge or seals replaced only as needed

Farwaniya
Mixer repair in Hassawi starts by identifying what is wrong: handle leaking, low pressure, or water pooling at the base. We disassemble the mixer carefully, replace only the faulty seals and internal valve parts and reassemble it, then test under full pressure.
Many Hassawi villas have kitchens with swivel-head mixers bolted firmly under marble worktops. These leak from the base because the rubber seal has compressed over time or hard water deposits have crusted on it. We remove the mixer gently, clean the marble and the bolt, replace the seal and spring stack and refit it with the right torque.
Hassawi is in Farwaniya governorate and contains family homes with open-plan kitchens where mixers are visible under marble.
Every mixer is cycled full-closed and full-open three times before sign-off because leaks often appear only after repeated use.
Source diagnosed; cartridge or seals replaced only as needed
Scale cleared from aerator, filter and internal mixer channels
Fault located in mixer, supply valve or feed pipe
Hot and cold channels checked and balance corrected
Old unit removed, new one fitted and pressure tested after
Valve behind each fixture checked for full shut-off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Usually the seal alone is enough, especially if the mixer is a decent brand and the handle still moves smoothly. We open it and test the cartridge first before recommending full replacement.
Usually the mixer inlet holes have scaled up with hard water deposits. We disassemble the head, clear each hole with a fine pin and soak the parts in descaling solution before reassembly.
