Dripping mixers
Source diagnosed; cartridge or seals replaced only as needed

Farwaniya
Mixer repair in Rai Industrial is different from homes: the mixers run under higher pressure and see heavy daily use. We check the full picture from tank to mixer, identify the real cause and repair only the faulty component.
Shops and small factories in Rai Industrial have heavy-duty mixers bolted to concrete walls with thick metal brackets. These leak when seals compress under constant high pressure or when brackets shift slightly from vibration of nearby machinery. We brace the brackets, inspect the inlet pipes, replace seals rated for industrial use.
Rai Industrial is in Farwaniya governorate adjacent to The Avenues Mall and contains small shops and manufacturing workshops.
Every repaired mixer is tested at 6 bar for ten minutes because operating pressure here runs at least 4 bar.
Source diagnosed; cartridge or seals replaced only as needed
Scale cleared from aerator, filter and internal mixer channels
Fault located in mixer, supply valve or feed pipe
Hot and cold channels checked and balance corrected
Old unit removed, new one fitted and pressure tested after
Valve behind each fixture checked for full shut-off
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
No. We first check whether inlet pipes have been bent from impacts or brackets have loosened. If pipes and brackets are solid the fault is in the mixer itself and we replace seals or the valve cartridge.
Standard mixers cannot withstand constant high pressure and heavy use. We fit bronze-bodied mixers with premium silicone seals and precision ball valves rated for industrial duty.
