Supply line checks
Pressure readings and joint checks to catch early leaks before damage spreads

Ahmadi
Building network maintenance at Zour focuses on massive cooling water lines and thermal waste drainage around the power generation plant. We track pressure drop and leaks at joints between large-diameter pipes. We test strainers and valves under heavy load.
The power plant at Zour needs continuous flow of desalinated seawater for cooling, and very large-diameter pipes run from the coastal underground pump chamber to generation units. Every welded joint lies two meters down, making leak checks at joints difficult without isolating test cocks and monitoring pressure drop. We also inspect hot waste lines carrying used water because sediment buildup blocks the branch quickly.
Zour sits in Ahmadi governorate, a coastal industrial area that depends on uninterrupted continuous cooling water supply.
Cooling water flow rate is measured daily because a slow decline signals sediment buildup in long pipes.
Pressure readings and joint checks to catch early leaks before damage spreads
Inspecting building drains and noting any slowdown or sediment before full blockage
Checking transfer and pressure pumps and all tanks at every scheduled visit
Camera and acoustic tools locate hidden leaks without breaking tiles on a guess
Checking and repairing mixers, taps and cisterns across the building units
Recording each visit's findings and repair recommendations for the building owner
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We isolate test cocks on each side of the joint and monitor pressure between them for one hour. Pressure drop confirms a hole in the weld or pipe.
Yes, we inject chemical cleaning solution through a test cock and let it circulate for hours, then flush with high-pressure water. We monitor pressure and flow before and after to confirm the cleaning worked.
