Wall position check
Marking the correct height and anchor points before any drilling

Mubarak Al-Kabeer
A wall-hung basin in Adan near Adan Co-op needs strong anchoring because coastal humidity affects walls. We choose a fixing point in a thick wall away from moisture seepage and run supply and waste in corrosion-resistant copper pipe. We bolt the bracket with steel fasteners and test every connection before we leave.
Adan villas are near the sea so walls absorb moisture quickly, especially north-facing and exterior walls. When choosing the basin position we avoid walls near windows and balconies and pick a drier interior wall. Copper pipes resist corrosion better than plain steel, and galvanized steel bolts do not rust easily.
Adan sits in Mubarak Al-Kabeer governorate near the seafront where high humidity demands corrosion-resistant materials.
All steel bolts are galvanized before fixing to protect the bracket from coastal moisture rust.
Marking the correct height and anchor points before any drilling
Fitting wall brackets rated to carry the basin weight safely
Connecting hot and cold lines with new isolation valves fitted
Setting a new trap and connecting to the waste run at the right fall
Fitting the mixer, strainer and all trim with sealed connections
Pressure check, waste flow test and full leak inspection before leaving
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, copper resists moisture and salt in the air. Plastic may crack under combined heat and humidity over years, but copper stays strong.
Only if we use plain untreated steel. We use galvanized or brass steel, both of which resist rust in damp environments.
