Wall position check
Marking the correct height and anchor points before any drilling

Ahmadi
Fitting a wall-hung basin in Mahboula requires checking walls for effects of sea proximity and high humidity in the area. We anchor brackets deep enough and run supply and waste, then test all joints before completion.
Homes and flats near Mahboula beach and Beach Road in block 12 face constant humidity and salt effects that penetrate outer walls. Inner bathroom walls appear dry but outer faces hold subsurface moisture that weakens fasteners. We choose an interior bathroom wall where possible, or use deeper holes with stainless-steel fasteners. Hot water pipes here often come from roof tanks exposed to direct sun, so we test pressure and temperature together.
Mahboula is a coastal district in Ahmadi governorate, where homes sit close to the Gulf shoreline.
We overload-test the bracket because subsurface wall moisture affects fastener holding strength over time.
Marking the correct height and anchor points before any drilling
Fitting wall brackets rated to carry the basin weight safely
Connecting hot and cold lines with new isolation valves fitted
Setting a new trap and connecting to the waste run at the right fall
Fitting the mixer, strainer and all trim with sealed connections
Pressure check, waste flow test and full leak inspection before leaving
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, subsurface moisture reduces fastener holding. We use stainless-steel anchors, drill them deep in the inner wall and test the mount by hanging 25 kilogrammes before fitting the basin.
Copper pipes handle high temperatures but dissolved salt in the water may cause internal corrosion. We use thick-wall copper pipes, clean joints carefully and test both cold and hot pressure together.
