Draining and deep clean
Sediment, algae and corrosion residue removed before any prep begins

Mubarak Al-Kabeer
Epoxy tank coating in Abu Hasaniya protects storage from seawater salt penetrating soil and foundations in this seafront district. We empty the tank, apply deep surface treatment, lay multiple epoxy coats and verify them with inspection camera before restart.
Seafront villas in Abu Hasaniya have elevated and ground tanks exposed directly to marine moisture and salt spray. These conditions accelerate corrosion of both metal and concrete tank walls. Epoxy coating creates a chemical barrier that stops salt and moisture reactivity, preventing water contamination by rust and brown deposits.
Abu Hasaniya sits in Mubarak Al-Kabeer governorate on the coast where salty sea breezes blow directly onto water tanks.
Before coating, rust thickness on tank walls is measured with a gauge to determine sanding depth needed.
Sediment, algae and corrosion residue removed before any prep begins
Walls and floor abraded so the epoxy bonds without lifting or bubbling
Two-coat system builds uniform thickness across all internal surfaces
Fine cracks sealed with filler compound before coating, not over them
Internal camera confirms full coverage and detects any early delamination
Tank refilled only after the epoxy has fully cured, confirmed on site
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, high humidity slows curing and can create small bubbles, so we choose dry weather days for application. We wait until humidity drops below optimal levels before starting.
No, all rust must be stripped by complete sanding before application or the coating will peel. We use power tools and hand sanding to reach corners and rough surfaces.
