Draining and deep clean
Sediment, algae and corrosion residue removed before any prep begins

Ahmadi
Epoxy tank lining in Sabahiya requires checking for fine cracks in concrete walls before any wash. We fill cracks with liquid epoxy resin, solvent-clean the surface, apply two high-adhesion coats and verify coverage with a camera probe.
Sabahiya residential houses built two decades ago have ground tanks with weak concrete walls that crumble under moisture. Before we start, we measure wall thickness with an ultrasonic gauge because thin walls may need glass mesh reinforcement under the epoxy. Every crack must be cleaned and bone-dry before filling, otherwise water gets trapped under the coat and lifts it.
Sabahiya is a residential zone in Ahmadi governorate, where aging water tanks need regular restoration work.
A steam vac precedes the solvent wash to strip away embedded clay and loose particles from tank concrete.
Sediment, algae and corrosion residue removed before any prep begins
Walls and floor abraded so the epoxy bonds without lifting or bubbling
Two-coat system builds uniform thickness across all internal surfaces
Fine cracks sealed with filler compound before coating, not over them
Internal camera confirms full coverage and detects any early delamination
Tank refilled only after the epoxy has fully cured, confirmed on site
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, but each crack needs an hour to dry after filling with resin. We start filling cracks in the morning and apply the primer coat in the afternoon once they are completely dry.
The epoxy seals existing cracks but cannot stop new concrete movement. If fresh cracks form, the concrete may be unstable and the tank base may need strengthening.
