Draining and deep clean
Sediment, algae and corrosion residue removed before any prep begins

Hawalli
Epoxy coating in Siddiq tackles tanks buried under tight yards between adjoining houses. We excavate access around the tank and brace neighbouring walls with timber sheets. We hoist the tank on ropes onto plastic blocks then scrape and coat the inside.
Siddiq houses are joined wall-to-wall with no gaps, and their tanks lie under very tight yards. Reaching the tank requires careful excavation and temporary bracing of shared walls. Old tanks may have rust on edges and the base from past seepage. We scrape rust away fully and apply epoxy in three tight coats to seal any voids in the concrete.
Siddiq is in Hawalli, a densely built residential district where ground tanks sit very close together under shared yards.
We test tank seal by filling one quarter with water and leaving it four hours to check for any seepage from the coated walls.
Sediment, algae and corrosion residue removed before any prep begins
Walls and floor abraded so the epoxy bonds without lifting or bubbling
Two-coat system builds uniform thickness across all internal surfaces
Fine cracks sealed with filler compound before coating, not over them
Internal camera confirms full coverage and detects any early delamination
Tank refilled only after the epoxy has fully cured, confirmed on site
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
If the tank is sound and coating is not peeling, we can coat the inside through the access hole. But if there is rust on outer walls or seepage, it must be lifted for full scraping of the outer surface.
Excavation, bracing and hoisting takes one day. Scraping and three-coat application takes one to two days depending on rust thickness. Lowering and final backfill takes half a day, totalling roughly three to three-and-a-half days.
