Underground tank cleaning
Removing sediment, algae and buildup from walls and floor

Ahmadi
Tank cleaning and sealing in Shuaiba Industrial begins by accounting for high salinity and mineral content near the petrochemical complex. We scrub rust and sediment from tank walls, apply corrosion-resistant waterproof coating, refill and test the entire seal before handover.
Shuaiba Industrial tanks are large, roof-mounted structures above factories and warehouses, and the water carries high salinity that eats through internal tank coatings fast. We measure coating thickness and spot any small pitting or hairline cracks starting to form, because even a tiny leak worsens within weeks. Tanks here typically need cleaning every six months and a strong waterproof seal that withstands salt and intense heat.
Shuaiba Industrial sits in Ahmadi governorate, a heavy industrial zone where factory and large-tank density is very high.
Every tank is tested by pressurizing water and measuring outflow for one hour to catch any hidden seepage.
Removing sediment, algae and buildup from walls and floor
Cleaning tanks exposed to heat and heavy mineral deposits
Safe epoxy coat that seals the surface and prevents contamination
Patching cracks and relining degraded fibreglass tank walls
Closing fractures and openings in steel or polyethylene tanks
Full clean, repair and waterproof seal in one organised visit
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
We recommend a full clean and inspection every six months minimum. Salt causes rapid coating wear, and mineral deposits settle at the bottom, accelerating localized corrosion.
We measure current coating thickness first with a gauge. If it is below standard or has pitting, we strip it entirely and apply fresh waterproofing to higher specifications.
