Crack welding
direct thermal weld along each fracture line in the tank wall
Hawalli
Tank welding in Hateen
Many Hateen villas keep an underground fibreglass tank below the courtyard, and tank welding there means working inside a confined space. We pump the tank dry, ventilate it and station a second person at the hatch before repair begins on the cracked wall or joint.
- 24-hour emergency
- Camera first, every job
- Leak detection without breaking
- All six governorates
What sets this area apart
Ground tanks near Hawalli sit in soil that moves slightly with moisture, and fibreglass cracks where the pressure is uneven. Once the tank is dry, we grind the damaged area back, lay new glass mat and resin in overlapping layers, and let each layer cure before the next. Fans run the whole time to clear resin fumes, and the tank is washed out before refilling so no residue reaches the house supply.
Hateen is a Hawalli governorate villa district next to Hawalli, where courtyard ground tanks feed many homes.
Every Hateen ground tank repair runs with forced ventilation and a second crew member stationed at the hatch.
What the service covers
Joint repair
re-welding inlet and outlet fittings where the flange joint has failed
Fibreglass patching
resin-and-mat layer over the damaged zone before the final weld seal
Seal verification
internal camera after welding reveals any weak point before refilling
Hatch replacement
replacing the tank lid when the leak source is the cover seal
Post-work report
written record of weld locations and camera inspection result
How we work
Our four steps, and you see every one
You call and describe it
Tell us what is happening and where, and the right equipment is loaded before we arrive.
The camera goes down
We film the line from inside and know the kind of blockage and its exact place. No guessing.
We clear it
High pressure water, a machine or a drain snake, whichever the line actually needs.
We film it again
The camera runs a second pass and you see the line clear with your own eyes before we leave.
Who we work for
Same method, same equipment. Only the size of the job changes.
Homes and apartments
- Drain and gully unclogging
- Cesspit suction
- Leak detection without breaking
- Tank cleaning and waterproofing
Offices
- Plumbing maintenance contracts
- Mixer and valve repair
- Low water pressure
- Clearing bathroom lines
Restaurants
- Grease traps
- Commercial kitchen lines
- Restaurant gas lines
- Scheduled clearing and cleaning
Complexes and buildings
- Sewer network maintenance
- Sewage and basement sump pumps
- Manhole and inspection chamber cleaning
- Operation and maintenance contracts
Why us
Why Al Amana
Amana means trust. Someone else's home is not ours to be careless in.
Filmed before and after
Do not take our word for it. Look at the line yourself.
Clearing before breaking
Breaking is the last resort, never the first step.
24-hour emergency
A blocked line does not wait for the morning.
All of Kuwait
Six governorates, 139 areas.
Maintenance contracts
For buildings and complexes, servicing before the problem starts.
We work on commercial sites too
Restaurants, offices and complexes, not only homes.
More areas for Tank welding
Other services in Hateen
Underground tank cleaning
See the detailsWater tank cleaning
See the detailsWater tank restoration
See the detailsEpoxy tank lining
See the detailsCommon questions
Questions about Tank welding in Hateen
Need someone now? The emergency line is open any hour.
+965 9668 4964
Is it safe to work inside an underground tank?
Only with ventilation and a second person at the hatch. We never enter a ground tank without both in place.
Can the house run without the ground tank during repair?
Usually, from the roof tank, for a short period. We fill the roof tank fully before draining the ground tank.
