Inspection and mapping
Internal camera maps every crack and spalled area before work starts

Ahmadi
Tank restoration in Abu Halifa involves lifting the lid and visually checking the body, floor and corners for cracks. We fully drain the tank, clean surfaces of mineral and organic sediment, then apply multi-layer internal protection and carefully run the system.
Abu Halifa holds residential units and industrial facilities where tanks suffer extreme temperatures under direct summer sun. Thermal expansion and contraction stress weld seams and the tank floor, potentially opening fine cracks invisible from outside. We use strong lights and inspect every corner and under each outlet. We tap the metal with a stethoscope to hear corrosion hidden beneath old paint.
Abu Halifa sits in Ahmadi governorate and combines residential and light industrial use, which increases demand for reliable tanks.
We pressure-test the tank under full water load for two hours to ensure not a single drop leaks through the new coating.
Internal camera maps every crack and spalled area before work starts
All scale, efflorescence and loose material removed before any filler is applied
Hydraulic mortar seals active and dry cracks in concrete walls and floor
Repair render restores corroded or pitted wall surfaces to a uniform face
Drinking-water rated coating applied over fully cured and prepared surfaces only
Camera confirms coating integrity and joint sealing before the tank refills
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Yes, the swing between night and day temperatures can exceed forty degrees Celsius, which stresses welds. We examine every seam under magnification before lining and may reinforce corners with an extra layer.
We recommend yearly cleaning to remove new dust and sediment, and inspect the coating every six months. If you notice water discolouration or odd smell call us for urgent inspection.
