Inspection and mapping
Internal camera maps every crack and spalled area before work starts

Jahra
Water tank restoration in Qasr focuses on careful inspection for pitting rust and localized corrosion in metal tanks. We remove all rust, test the structural integrity of walls and floor, then apply a thick epoxy protective layer to keep water clean.
In Qasr most family homes have roof tanks exposed to very high thermal stress in summer. Constant expansion and contraction causes small cracks first at welded seams, widening later. We open the tank and inspect every weld carefully under strong light, testing metal thickness with ultrasound gauge. If we find weak welds we re-weld that section before coating.
Qasr is a residential area in Jahra governorate, marked by rapid urban expansion and relatively modern homes with metal tanks on roofs.
We test every welded joint using dye penetrant inspection before applying the protective coat.
Internal camera maps every crack and spalled area before work starts
All scale, efflorescence and loose material removed before any filler is applied
Hydraulic mortar seals active and dry cracks in concrete walls and floor
Repair render restores corroded or pitted wall surfaces to a uniform face
Drinking-water rated coating applied over fully cured and prepared surfaces only
Camera confirms coating integrity and joint sealing before the tank refills
How we work

Tell us what is happening and where, and the right equipment is loaded before we arrive.

We film the line from inside and know the kind of blockage and its exact place. No guessing.

High pressure water, a machine or a drain snake, whichever the line actually needs.

The camera runs a second pass and you see the line clear with your own eyes before we leave.
Same method, same equipment. Only the size of the job changes.




Why us
Amana means trust. Someone else's home is not ours to be careless in.
Do not take our word for it. Look at the line yourself.
Breaking is the last resort, never the first step.
A blocked line does not wait for the morning.
Six governorates, 139 areas.
For buildings and complexes, servicing before the problem starts.
Restaurants, offices and complexes, not only homes.
Common questions
Need someone now? The emergency line is open any hour.
+965 9668 4964
Not necessarily. If weak points are only at seams we re-weld those areas, clean and coat them. If the metal itself is too thin over a large area we may suggest a new tank.
Yes, but the interruption is brief, usually just a few hours. We drain the tank first, work on the interior, and refill after coating and drying. We agree with you on the best time to work.
